China wholesaler Belt Conveyor Pulley for Mining and Mineral Application idler pulley

Product Description

We can produce conveyor rollers of various standards, diameters, lengths, and types
Welcome to write to us
 

Product Description

 

Description Fabrication Services flat belt idler pulley for belt conveyor
Application Used in electric power, metallurgy,mine,coal, cement,steel,chemical, port, hydroelectric power and grain industries
Pipe/Tube/Shell 1)Material:Q235 Steel
2)Diameter:219mm-3000mm
3)Length:500mm-5000mm,depends on the belt width of the conveyor
Shaft/Axis Material:#45 Steel
Bearing Big roving crack, deep groove ball with double sealing
Welding Pipe and bearing housing with automatic welding
Surface Smooth steel color surface,  rubber lagging surface
Color Red,green,blue or as require
Service life More than 30,000 hours
Standard GB,ISO,DIN,CEMA,JIS

Our Pulley Features:
 

Conveyor Pulley  Test  
1. All butt welds shall be full Penetration
2. All welds to be full seal welds to prevent rust
3. Shell seam welds are submerged arc (SAW)
4. Includes stress relieving of shell prior to machining
5. Ultrasonic testing of all shafts
6. Drillings for Temperature probe / vibration analysis device
7. Remove all butts and sharp edges
Conveyor Pulley Shaft Selection  
The major cause of conveyor pulley failure is excessive shaft deflection. The Conveyor Pulleys – ZheJiang HSCD Engineering department can perform Stress Analysis and Finite Element Analysis to maximize your conveyor pulley performance. 
 
Conveyor Pulley Shell Material  
Q345B Carbon Steel
GR350 Carbon Steel
ANSI 4140 Alloy Steel
ASTM A514B Stainless Steel
Bearing House   SKF/NSK/ /HRB/LYC, as customer request. 
Conveyor Pulley Lagging  
Plain rubber lagging, Herringbone and CHINAMFG grooves are all available 
. Hot Vulcanised Durometer 
. Hardness 50-55-65 Shore A, M Grade
. Oil Resistant, Heat Resistant FRAS
Comprising  
•Drive pulley, Head pulley and Tail Pulleys
•Take-Up Pulleys,
•Snub pulley & Bend Pulleys
•Self Cleaning Spiral CHINAMFG pulley & Drum Pulleys
Significant advantages  
• The thick pulley shell absorbs more stress.
• The large CHINAMFG angle provides superior belt tracking capabilities.
• True concentric machining provides:
• maximum contact with the belt,
• consistent belt content discharge,
• less deflection of shaft,
• less stress on the bearings
Available
Conveyor Pulley Designs
 
•Liveshaft or Deadshaft types.
•Flat or crowned shell.
•Taconite, labyrinth or speciality seals.
•Oil or grease lubricated.
•Self centering or low pressure lock element designs.

 

Our workshop

Our packaging

our products

Our certificate

 

 

 

Packaging & Shipping

 

Company Profile

 

ITALY CHINAMFG OU GROUP is a CHINAMFG international companies in the world advanced level . REAL is a registered trademark of CHINAMFG OU GROUP , designed and manufactured REAL brand roller, roller , large belt conveyors in Italy, Germany, Turkey and other countries have extensive influence , by customers alike. CHINAMFG OU GROUP valued Chinese market there is huge potential, has been dedicated to the development of China ‘s roller market. In order to meet the needs of the customers , after many visits screening, HangZhou CHINAMFG Conveying Machinery Co.,Ltd, advanced production technology and years of quality customers as a platform , has won REAL directors unanimously approved, CHINAMFG OU GROUP authorized HangZhou CHINAMFG Conveying Machinery Co.,Ltd REAL brand for the Chinese region specified design and development, production and sales, service as 1 of the company, CHINAMFG OU GROUP, with its strong technical foundation, rich belt conveyor production experience and the international influence of the brand as a backup support, REALwith CHINAMFG joint venture together to open up the Chinese market a variety of mine roller, belt conveyors businesses together to provide our customers with quality services. HangZhou CHINAMFG Conveying Machinery Co.,Ltd was founded in May 2 thousand and five. It’s a private enterprise of stock-holding system .It was located in the economic and technological development zone of Xihu (West Lake) Dis. town, HangZhou city. ZheJiang province .This place is beautiful and CHINAMFG ,and the transport is very convenient.On November 18, 2013, joint venture with the ITALY CHINAMFG OU GROUP, specializes in producing REAL brand TD75, DTII, DTIIA type fixed conveyor, mobile elevating conveyors, roller and roller.The products have gained various patents . We have got the national industrial products production license issued by the state administration of quality supervision, inspection and quarantine of the People’s Republic of China , the company has been identified as CHINAMFG trademarks in dHangZhou city committee. Enhance the brand of ‘YI LUN’.Our company has the right of exportation and the products are sold to Middle East ,Africa ,Australia ,Europe ,Southeast Asia ,Russia and some other countries and regions. The company has large lathe, numerical control, double pressing machine, double welding machine, double boring lathe, milling machine, sawing machine and so on .The company produces more than 2 thousand rollers a day and over 7 hundred thousand a year .We choose and use the special tube ,cold-drawing shaft and famous bearing to make the rollers ,and the rollers were sealed by nylon .The professional inspectors used testing equipments to examine waterproof , preventing static electricity ,sideways ,moving up and down ,revolving resistance and falling of the rollers .The examine result is that the qualified rate of the rollers is over 98%. The noise of the rollers is very low and its turning is very nimble .The life of the rollers is over 30000 hours ,and the products were praised by all the customers .The products were widely used for mine ,coal mine ,port ,steel plant ,electric plant ,feed-processing plant ,cement plant and some other enterprises. This company pursues that credit is as aim and puts the quality above all else .We request to live and develop with quality and credit .Strengthen the inner management and improve the quality of the products constantly .Offer the best products for customers from the beginning to the end .At the same time ,provide quality service for the customers ,because serving the customers well is also the aim of our enterprise.

HangZhou CHINAMFG Conveying Co., Ltd
Name roller,idler,pulley
Material Stainless Steelseamless pipe, welded pipe
Size Any size as your demand
Color Red, yellow,any color as your demand
Standard ISO 9001:2000 , BV Certificate
MOQ 10-50 pcs
Bearing 6204,6205,6206,6305 ect
Shaft diameter 20-40 mm
Pipe diameter 60-219 mm
Type DT75,DTII,DTIIA,TK,TKII
OEM Welcome
Lifetime At least 5000 hours
Material for transport Coal,Ore,Clinker,grain,plant,fertilizer,ect
Paint Common paint and baking varnish
Producing capacity 1500pcs per day
Payment Term TT, L/C
Loading port ZheJiang ,HangZhou
Production Time 7-15days after getting the deposite
Specifications 1.Large capacity,2.High speed.3.Easy to install,repaire and maintenance.4.High output,efficiency,low noise.
Advantage 1.Best price.2.Quality control whole process.3.Quick,efficient,comprehensive service.

FAQ

 

1. who are we?
We are based in ZheJiang , China, start from 2005,sell to Mid East(64.00%),Eastern Asia(16.00%),South America(7.00%),Southeast Asia(7.00%),Africa(6.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Alway

s final Inspection before shipment;

3.what can you buy from us?
Belt Conveyor,Conveyor Spare Parts,Conveyor Pulley,roller brackets,belts

4. why should you buy from us not from other suppliers?
We have a professional team with rich experience in conveyor industry at CHINAMFG Our team will provide first-class service to you.

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,FCA,Express Delivery;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese,Russian

Material: Carbon Steel
Surface Treatment: Polishing
Motor Type: Frequency Control Motor
Installation: Turning
Thickness of Rubber Surface: 8mm 10mm 12mm 15mm 20mm
Diameter: 159—2000mm
Customization:
Available

|

Customized Request

belt pulley

What are the maintenance requirements for belt pulleys in industrial settings?

In industrial settings, proper maintenance of belt pulleys is essential to ensure their optimal performance, longevity, and safe operation. Here’s a detailed explanation of the maintenance requirements for belt pulleys in industrial settings:

1. Regular Inspection: Belt pulleys should be inspected regularly to identify any signs of wear, damage, or misalignment. Inspect the pulleys for cracks, corrosion, excessive wear on the grooves, or any other visible abnormalities. Check for proper alignment by examining the position of the pulleys relative to each other and their corresponding belts. Regular inspections help detect issues early on and prevent further damage or failures.

2. Lubrication: Proper lubrication is crucial for the smooth operation of belt pulleys. Lubricate the pulley bearings according to the manufacturer’s recommendations. This helps reduce friction, heat generation, and wear on the bearings. Use the appropriate lubricant and follow the recommended lubrication intervals to ensure optimal performance and extend the life of the pulleys.

3. Tension Adjustment: Maintaining proper belt tension is vital for the efficient and reliable operation of belt pulleys. Check the tension of the belts regularly using the manufacturer’s guidelines or recommended tensioning devices. Adjust the tension as needed to ensure the belts are neither too loose nor too tight. Proper tensioning allows for effective power transmission, minimizes belt slippage, and reduces wear on the belts and pulleys.

4. Belt Replacement: Over time, belts may wear out or become damaged. Regularly inspect the belts for signs of wear, cracking, fraying, or excessive stretching. If any of these issues are present, replace the belts promptly with new ones of the correct size and type. Using worn or damaged belts can lead to reduced performance, increased risk of pulley damage, and potential system failures.

5. Cleaning: Keep the belt pulleys clean and free from debris, dust, and dirt that may accumulate over time. Use appropriate cleaning methods, such as brushing or compressed air, to remove any contaminants that could affect the pulley’s performance or the grip of the belts. Clean pulleys contribute to better belt traction, reduce the risk of slippage, and improve overall system efficiency.

6. Alignment Correction: Proper pulley alignment is crucial for efficient power transmission and to prevent premature wear. If misalignment is detected during inspections or if the belts are not running smoothly, take corrective measures to align the pulleys correctly. Use alignment tools, such as laser alignment devices, to ensure precise alignment of the pulleys. Proper alignment minimizes belt wear, reduces noise and vibration, and extends the life of the pulleys and belts.

7. Safety Measures: When performing maintenance on belt pulleys, always adhere to safety procedures. Follow lockout/tagout protocols to isolate the equipment from power sources before inspecting or working on the pulleys. Use appropriate personal protective equipment (PPE) to protect against potential hazards. Ensure that maintenance personnel are trained in safe maintenance practices and are familiar with the specific procedures for working with belt pulleys.

8. Record Keeping: Maintain a record of maintenance activities and inspections performed on belt pulleys. This includes dates of inspections, lubrication, tension adjustments, belt replacements, and any corrective actions taken. Keeping a maintenance log helps track the history of maintenance activities, identify recurring issues, and plan future maintenance tasks effectively.

In summary, the maintenance requirements for belt pulleys in industrial settings include regular inspections, proper lubrication, tension adjustment, belt replacement, cleaning, alignment correction, adherence to safety measures, and maintaining a maintenance record. By following these maintenance requirements, industrial facilities can ensure the optimal performance, longevity, and safe operation of belt pulleys, contributing to the overall efficiency and reliability of their industrial processes.

belt pulley

How do belt pulleys handle variations in load capacity and speed?

Belt pulleys are designed to handle variations in load capacity and speed by providing flexibility and adjustability in power transmission systems. They offer several mechanisms to accommodate changes in load and speed requirements. Here’s a detailed explanation of how belt pulleys handle variations in load capacity and speed:

1. Load Capacity: Belt pulleys can handle variations in load capacity through the selection of appropriate belt materials, pulley sizes, and belt tension. When the load increases, the belt tension can be adjusted to ensure proper power transmission. By increasing the tension, the grip between the belt and pulley increases, allowing for the transfer of higher loads. Belt materials with higher tensile strength and load-bearing capacity can also be chosen to handle heavier loads.

2. Speed Variation: Belt pulleys offer the ability to handle variations in speed through different mechanisms:

a. Fixed Speed Ratios: In applications where a fixed speed ratio is required, belt pulleys of specific sizes are selected to achieve the desired speed ratio. By choosing pulleys with different diameters or numbers of grooves, the speed of the driven pulley can be adjusted relative to the driving pulley, resulting in the desired speed variation.

b. Variable Speed Pulleys: Variable speed pulleys, also known as adjustable or variable pitch pulleys, enable continuous speed control. These pulleys feature movable pulley halves or arms that change the distance between the grooves. By adjusting the position of the movable pulley, the effective diameter of the pulley changes, altering the speed ratio. This allows for stepless speed variation within a defined range, providing flexibility in adjusting the speed of the driven system.

c. Step Pulleys: Step pulleys have multiple grooves of different diameters on the same pulley. By changing the belt position between these grooves, the speed ratio can be adjusted. Step pulleys provide a range of predetermined speeds by selecting the appropriate groove, allowing for different speed settings suitable for various operations.

d. Motor and Pulley Size Selection: By selecting motors and pulleys of different sizes or using different combinations of belt pulleys, the speed of the driven system can be adjusted. This is commonly seen in applications where multiple speed options are required, such as in drill presses or lathes, where a range of speeds is needed for different cutting operations.

Overall, belt pulleys handle variations in load capacity and speed by offering flexibility in belt tension, selecting appropriate pulley sizes and materials, utilizing variable speed pulleys, employing step pulleys, and choosing motor and pulley combinations to achieve the desired speed ratios. These mechanisms allow for efficient power transmission in a wide range of applications with varying load and speed requirements.

belt pulley

In which industries are belt pulleys commonly used?

Belt pulleys find widespread usage in various industries where power transmission is required. These versatile components are utilized in numerous applications across different sectors. Here are some industries where belt pulleys are commonly used:

1. Manufacturing and Industrial: Belt pulleys are extensively employed in manufacturing and industrial settings. They are used in machinery such as conveyor systems, manufacturing equipment, material handling systems, and production lines. Belt pulleys enable the transfer of power between different machine components, facilitating the movement of materials and the operation of various manufacturing processes.

2. Automotive and Transportation: The automotive industry relies heavily on belt pulleys for power transmission in vehicles. They are used in engines, where they drive components like the alternator, water pump, power steering pump, and air conditioning compressor. Belt pulleys are also employed in vehicle accessory systems, such as serpentine belt systems, timing belt systems, and supercharger systems.

3. HVAC and Refrigeration: Heating, ventilation, air conditioning (HVAC), and refrigeration systems commonly use belt pulleys. They are utilized in air handling units, fans, blowers, compressors, and refrigeration units to transfer power and drive the necessary components for temperature regulation and air circulation.

4. Agriculture and Farming: Belt pulleys play a crucial role in agricultural machinery and farming equipment. They are used in tractors, combines, harvesters, and various other machines involved in planting, harvesting, and processing agricultural products. Belt pulleys enable the operation of components like grain augers, threshers, balers, and conveyor systems in the agricultural industry.

5. Construction and Mining: The construction and mining sectors utilize belt pulleys in heavy machinery and equipment. They are employed in excavators, loaders, bulldozers, cranes, and other construction and mining machines. Belt pulleys enable the movement of materials, control the operation of hydraulic systems, and drive various components in these industries.

6. Power Generation: Belt pulleys are used in power generation facilities, including thermal power plants, hydroelectric plants, and wind farms. They are employed in generators, turbines, and other power generation equipment to transmit rotational motion and drive electrical generators, ensuring the production of electricity.

7. Paper and Printing: The paper and printing industry relies on belt pulleys for various processes. They are used in printing presses, paper mills, paper converting equipment, and packaging machinery. Belt pulleys facilitate the movement of paper rolls, drive printing cylinders, and control the operation of paper handling systems.

8. Food and Beverage: Belt pulleys are utilized in the food and beverage industry for processing and packaging applications. They are employed in conveyors, mixers, blenders, food processing machinery, and packaging equipment. Belt pulleys enable the movement of ingredients, control the speed of mixing and blending processes, and drive packaging systems.

These are just a few examples of industries where belt pulleys are commonly used. The versatility and reliability of belt pulleys make them applicable in a wide range of sectors where power transmission and motion control are essential.

In summary, belt pulleys are commonly used in industries such as manufacturing, automotive, HVAC and refrigeration, agriculture, construction, mining, power generation, paper and printing, and food and beverage. They are vital components for power transmission in various machines and systems, enabling efficient operation in these industries.

China wholesaler Belt Conveyor Pulley for Mining and Mineral Application   idler pulley	China wholesaler Belt Conveyor Pulley for Mining and Mineral Application   idler pulley
editor by CX